DIN-10 rail format to facilitate installation inside an electrical equipment box, or they can be screwed directly onto the wall.
Control the electronic intercom from your home phone and
forward calls from the intercom to a mobile phone when you are not at home .
The telephone interface is the
perfect complement to the electronic intercom. Installed in the home it allows communication and door opening
from any landline or wireless telephone .
It also performs telephone dialer functions, so that it is possible to divert the call from the electronic intercom through the telephone line to a programmed telephone number.
This application is very useful for private homes when the owner is absent.
The main feature of this Telephone Interface is that
a single reference is used for 4+N analog installations and VDS installations .
Other new features compared to its predecessors are:
- Adjust audio levels from the phone.
- Possibility to change the conversation mode to half-duplex or simplex mode dynamically.
- Remote access from the external line (protected by a PIN code), to all functions available to internal telephones: relay activation, programming, connection to the entrance panel, door opening,... etc.
- Call forwarding. In the event that there is no response from the internal telephones, forwarding to a second telephone in case the first does not answer.
- Configurable timing parameters.
- Compatibility with advanced telephony services (use of * and #).
- Use of pause in the external call number.
- External signaling of diversion mode.
The interface accepts
different configurations and work modes .
These are the available modes:
- 4+N System: In this mode, the interface works with the analog street panel system where the call is generated by an individual cable. In 4+N there is only one working mode:
- Individual Call (SCM). The interface acts as a telephone terminal that responds to a single call from the street panels.
- VDS system: In this mode, the interface will work with the VDS system, where the call is made through a command.
In VDS there is the possibility of working in two different work modes:
- Individual Call (SCM). The interface acts as a telephone terminal that responds to a single call from the street panels.
- Multiple Call (MCM). The interface acts as a gateway between the VDS system and a telephone system (telephone switchboard or a telephone line), translating VDS calls into telephone numbers, that is, multi-call, to generate calls. to different extensions or telephones depending on the VDS call generated at the entrance panel. In this way, it will be possible to call different extensions in an office from the outdoor panel, not just one as in previous models.
